MULTI FILLER
€0.00
Professional grade extra strong PVA wood adhesive which dries transparent D2
MINOS WOOD ADHESIVE is a white waterbased, thixotropic, fast curing wood adhesive based on PVA, which dries transparent. Offers a high strength bond, resistant to heat, aging, vibrations and shocking. Does not stain, it is odorless, and environmentally friendly. Suitable for interior applications.
ADVANTAGES
- Excellent bonding strength
- Humidity resistance
- Temperature resistance
- Resistance to ageing
- Dries transparent
- Environmentally friendly
APPLICATIONS
- Suitable for all wood constructions.
- Bonding of hard and soft wood mitre joints.
- Bonding of MDF, plywood, veneers.
- Bonding plasterboard, polystyrene, cork, cardboard, fabric to chipboard and MDF.
† |
† |
† |
† |
| Coverage: 80 – 200 gr/m2 |
Thinning: no |
Application: by brush |
Application: by roller |
† |
† |
† |
† |
| Application: by knife |
Initial bonding: 30 minutes 20oC |
Final bonding: 24 hours 20oC |
Interior use |
† |
† |
||
| Application temperature: 10oC – 35oC |
Cleaning: with water |
† | † |
INSTRUCTIONS FOR USE
- All surfaces must be dry and clean from dust and grease and fit closely together.
- Stir adhesive thoroughly before use
- Apply the adhesive with a brush, roller, spatula or directly from the nozzle.
- Apply an even film of adhesive to one surface only.
- Allow the adhesive to soak into the parts for some minutes.
- Assemble the joint whilst adhesive is still wet and apply light pressure.
- The use of clamps or press is suggested. The pressure must then be sufficiently high and evenly applied to the entire surface.
It is advisable to perform a suitability test prior to full scale application
REMARKS
- Do not use below 12oC and relative humidity >60%
- Ideal moisture content of the wood: 8 – 12%
- Significant irregularities reduce the contact surface and therefore will lead to unsatisfactory bonding results.
Related products
-
PLASTIC METAL
€0.00 -
FLUX
€0.00 -
SUPER TAPIS
€0.00