SWAN BATH & KITCHEN

SWAN BATH & KITCHEN

0.00

Mirror adhesive based on hybrid polymer

SUPER MIRROR is a high performance, one-component, high bonding strength, mirror adhesive based on M-S Polymer. It is specially formulated for fixing traditional silver backed mirrors directly onto building substrates. It is also suitable for sealing low movement joints in construction, automotive, marine, aerospace industries, where a tough flexible rubber sealant is required.

ADVANTAGES

  • High bonding strength on nearly all surfaces
  • Excellent adhesion on porous and non-porous substrates
  • High performance mechanical properties
  • Flexible elastic rubber Äì movement accommodation up to 20%
  • Straightforward application even in adverse conditions
  • No bubble formation within sealant (in high temperature and humidity applications)
  • Good extrudability even at low temperatures
  • UV resistance
  • Free of isocyanates, solvents, halogens and acids
  • No staining of porous materials such as natural stones, granite, marble, etc
  • Very easy to tool and finish

APPLICATIONS

  • Fixing mirrors on porous and non-porous building substrates such as ceramic tiles, wood, MDF, concrete, stone, glass, metal and formica. It has been successfully tested on metal surfaces such as steel, brass, galvanized steel and on plastic substrates such as PVC, polystyrene, polycarbonate, ABS, polyamide, polyester (GRP).
  • All sealing and bonding applications in the building industry

Structural bonding in vibrating constructions

Coverage:

300 – 1000 gr/m2 or 25 – 40 gr/m

Thinning:

no

Application:

by caulking gun

Skin formation:

10 minutes 20oC

Curing Rate:

2 – 3mm /24h 20oC

Exterior use

Interior use

Application temperature:

10oC – 35oC

Cleaning:

with white spirit

INSTRUCTIONS FOR USE

  1. Surfaces must be clean, free of dust and grease.
  2. No primer required prior to application. Apply primer PU 900 only for high humidity applications.
  3. Using a caulking gun, apply vertical beads in 15cm intervals to the mirror backing
  4. Heavy mirrors may require mechanical support until full cure is reached

If you are unsure of the backing materialÄôs compatibility, perform a preliminary test on a sample.

JOINT SIZE

Minimum Width: 2mm (bonding applications) and 5mm (joints)
Maximum Width: 10mm (bonding applications) and 30mm (joints)
Minimum Depth: 5mm (joints)
Recommendation: 2 X depth = width

REMARKS

  • Not suitable for PE, PP and PTFE
  • Cannot replace traditional glazing putty
  • SUPER MIRROR can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibility test.
  • SUPER MIRROR may be overpainted with waterbased paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase.

Product Details
SKU: ps-10118 Categories: ,

About SWAN BATH & KITCHEN

Bath and kitchen acrylic paint with excellent resistance to humidity and mould