MINOS COLOR SPRAY
€0.00
Super transparent decorative acrylic varnish
CLEAR LACK ACRYLIC is a pure acrylic coating. Offers a fast drying, tough, clear acrylic finish. It is user friendly with a very wide range of applications at work, home, DIY, hobbies. It is suitable for most surfaces including all kinds of wood, metal, stones, paper, plastics, ceramics etc.
ADVANTAGES
- Fast drying
- Good coverage
- Lasting gloss
- Good surface hardness
- Non-fading and UV resistant
- Resistance to water and weather influences
- Resistant to petrol, chemicals
- Wear resistant and scratch free
- Easy to use
APPLICATIONS
- Protection and decoration of arts and crafts
- Protection and finishing of wooden surfaces
- Metal over lacquering
- Waterproofing coating for maps and technical drawings
- Protection and insulation of circuit boards and other electronic components
† |
† |
† |
† |
|
Coverage: 2-3 m2 /400 ml |
Touch dry: 20 – 30 minutes 20oC |
Hard dry: 2-3 hours 20oC |
Exterior use |
† |
† |
† |
|
|
Interior use |
Application temperature: 10oC – 35oC |
Cleaning: with nitro solvent |
METHOD OF APPLICATION
- The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand metal and wooden surfaces.
- Before use, shake the can for 2 minutes and spray a sample.
- Apply varnish quickly and evenly in a thin coat from a distance of 25-30cm, moving the can from side to side and slowly going up or down. Allow to dry. Touch dry usually 20 -30 minutes at 20oC.
- If needed apply a second coat (depending on the desired degree of protection) when the first coat is completely dry.
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.
CLEANING
With nitro solvent or general purpose thinner
REMARKS
A suitability test is recommended for plastics and painted surfaces.
