ALL FIX
€0.00
MS polymer adhesive and sealant
ALL FIX is a high quality one component adhesive and sealant based on MS-Polymer new advanced technology with high adhesive strength. It is chemically neutral and fully elastic. It is suitable for applications in construction, automotive, marine and aerospace areas where a tough flexible rubber joint or adhesive with powerful bond strength is required.
ADVANTAGES
- Excellent applicability
- High bonding strength and fast cure onto nearly all surfaces
- Primerless adhesion even on damp surfaces
- High performance mechanical properties
- Colour stability and UV resistant
- No staining of highly porous materials such as natural stone, blue stone, marble, granite
- Permanently elastic after curing
- Paintable with most paints
- Ecological advantages -free of isocyanates, solvents, halogens and acids
APPLICATIONS
- Fixing, bonding and assembling constructions
- Sealing and bonding in the building and construction industry
- Sanitary and kitchen areas -resists mould growth
- Structural bonding in vibrating constructions
- Sealing of floor and wall joints
- Sealing and bonding of natural stone (marble, granite etc.)
- Sealing of connection joints in metal constructions
- Mirror bonding, direct application onto the back of the mirror
† | † | † | † |
Coverage: depends on width and depth of joint |
Thinning: no |
Application: by caulking gun |
Skin formation: 10 minutes 20oC |
† | † | † | † |
Curing Rate: 2 – 3mm /24h 20oC |
Exterior use |
Interior use |
Application temperature: 10oC – 35oC |
† | † | † | † |
Cleaning: with white spirit |
† | † | † |
INSTRUCTIONS FOR USE
- Surfaces must be clean, free of dust and grease
- Use caulking gun
- Repair with ALL FIX
- Finish with soapy water before skin formation
A suitability test is recommended.
ALL FIX may be over painted; however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, we recommend a preliminary compatibility test. This product cannot be used as a glazing sealant.
JOINT SIZE
Minimum Width: 2mm (bonding) / 5mm (joints)
Maximum Width: 10mm (bonding) / 30mm (joints)
Minimum Depth: 5mm (joints)
Recommendation: 2 X depth = width
REMARKS
ALL FIX presents good resistance to water, aliphatic solvents, mineral oils, grease, diluted inorganic acids and alkalis. Presents poor resistance to aromatic solvents, concentrated acids, chlorinated hydrogens