ALL FIX
€0.00
MS polymer adhesive and sealant
ALL FIX is a high quality one component adhesive and sealant based on MS-Polymer new advanced technology with high adhesive strength. It is chemically neutral and fully elastic. It is suitable for applications in construction, automotive, marine and aerospace areas where a tough flexible rubber joint or adhesive with powerful bond strength is required.
ADVANTAGES
- Excellent applicability
- High bonding strength and fast cure onto nearly all surfaces
- Primerless adhesion even on damp surfaces
- High performance mechanical properties
- Colour stability and UV resistant
- No staining of highly porous materials such as natural stone, blue stone, marble, granite
- Permanently elastic after curing
- Paintable with most paints
- Ecological advantages -free of isocyanates, solvents, halogens and acids
APPLICATIONS
- Fixing, bonding and assembling constructions
- Sealing and bonding in the building and construction industry
- Sanitary and kitchen areas -resists mould growth
- Structural bonding in vibrating constructions
- Sealing of floor and wall joints
- Sealing and bonding of natural stone (marble, granite etc.)
- Sealing of connection joints in metal constructions
- Mirror bonding, direct application onto the back of the mirror
| † |
† |
† |
† |
|
Coverage: depends on width and depth of joint |
Thinning: no |
Application: by caulking gun |
Skin formation: 10 minutes 20oC |
| † |
† |
† |
† |
|
Curing Rate: 2 – 3mm /24h 20oC |
Exterior use |
Interior use |
Application temperature: 10oC – 35oC |
| † |
† | † | † |
|
Cleaning: with white spirit |
† | † | † |
INSTRUCTIONS FOR USE
- Surfaces must be clean, free of dust and grease
- Use caulking gun
- Repair with ALL FIX
- Finish with soapy water before skin formation
A suitability test is recommended.
ALL FIX may be over painted; however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase. Due to the wide variety of possible substrates, we recommend a preliminary compatibility test. This product cannot be used as a glazing sealant.
JOINT SIZE
Minimum Width: 2mm (bonding) / 5mm (joints)
Maximum Width: 10mm (bonding) / 30mm (joints)
Minimum Depth: 5mm (joints)
Recommendation: 2 X depth = width
REMARKS
ALL FIX presents good resistance to water, aliphatic solvents, mineral oils, grease, diluted inorganic acids and alkalis. Presents poor resistance to aromatic solvents, concentrated acids, chlorinated hydrogens

GRAFFITI REMOVER
SWAN V MAX EMULSION

