BONDFLEX 450 FC MARINE
€0.00
Polyurethane sealant and adhesive
BONDFLEX 390 FC is a high quality, one-component elastic polyurethane sealant and adhesive, suitable for a wide range of sealing and bonding applications in building and shipbuilding industries.
ADVANTAGES
- Excellent adhesion
- Stays elastic after curing
- Excellent resistance against all atmospheric conditions
- Excellent resistance to many chemicals
- Rapid polymerization
- Can be painted
APPLICATIONS
- All sealing and bonding applications in building and metal industries
- Sealing and bonding applications in shipbuilding industry
- Structural bonding in vibrating constructions
- Sealing and bonding applications in automotive industry
- All kinds of structural bonding and sealing applications
- All sealing and bonding applications in building and metal industries
- Sealing and bonding applications in shipbuilding industry
- Structural bonding in vibrating constructions
- Sealing and bonding applications in automotive industry
- All kinds of structural bonding and sealing applications
† | † | † | † |
Coverage: depends on width and depth of joint |
Thinning: no |
Application: by caulking gun |
Skin formation: 15 minutes 20oC |
† | † | † | † |
Curing Rate: 3mm /24h 20oC |
Exterior use |
Interior use |
Application temperature: 10oC – 35oC |
† | † | † | † |
Cleaning: with white spirit |
† | † | † |
INSTRUCTIONS FOR USE
- Surfaces must be clean, free of dust and grease.
- In very warm and moist climates we recommend the use of PRIMER PU for applications on porous surfaces.
- Use caulking gun
- Repair with BONDFLEX 390 FC.
- Finish with soapy water before skin formation.
- Cured material may be painted with most paints. When painted with oxidative drying paints disturbances in the drying of the paints may occur.
A suitability test is recommended
Not recommended for applications on PVC & glass
JOINT SIZE
Minimum thickness: 2mm (bonding) / 5mm (joints)
Maximum thickness: 10mm (bonding) / 30mm (joints)
Minimum Depth: 5mm (joints)
Recommendation: joints ⧠12mm depth = width / Joints >12mm 2 X depth = width