EPOXITE DRYMAX WET
€0.00
2 component, extra strong anchoring epoxy adhesive – putty
ΕPOXITE CONSTRUCT is a two component, industrial type, powerful epoxy adhesive-putty. It exhibits high resistance in humidity, solvents and temperature variations. It does not shrink and it is ideal for bonding similar and dissimilar construction and industrial materials. It is specially recommended for marble and granites.
ADVANTAGES
- Extremely powerful bonding
- Bonds dissimilar materials
- Wide variety of applications
- High humidity resistance
- High temperature resistance
- Excellent resistance to most chemicals
- Paintable
- It does not contain solvents
APPLICATIONS
- Ideal for bonding marble, granite, ceramic tiles, metal, concrete, stone, ceramics, wood, etc.
- Repairs cracks and small holes on concrete
- Bonds fresh to hardened concrete
- Fixing and imbedding steel reinforcement for concrete
- Bonding of reinforcement steel jackets
† |
† |
† |
† |
|
Coverage: 1,7 kg/m2/mm layer thickness |
Thinning: no |
Application: by knife |
Initial bonding: 2 hours 20oC |
† |
† |
† |
† |
|
Final bonding: 24 – 48 hours 20oC |
Exterior use |
Interior use |
Application temperature: 10oC – 35oC |
† |
† | † | † |
|
Cleaning: with nitro solvent |
† | † | † |
INSTRUCTIONS FOR USE
- Surfaces must be dry and clean from dust and grease.
- Using a spatula, mix equal amounts from EPOXITE CONSTRUCT A (resin) and EPOXITE CONSTRUCT B (hardener) on a clean surface, until the material has a uniform gray color.
- Apply adhesive on one surface of the joint and assemble carefully.
- Keep the joint supported until set (approx. 1 hour).
- Mix the needed amount of adhesive each time since the mixture will harden within 3-10 minutes, depending on ambient temperature.
- EPOXITE CONSTRUCT attains its full strength after 24 hours.
Remark: replace caps correctly after use and close tightly.
It is advisable to perform a suitability test for each application.
Related products
-
PORODUR UVA
€0.00 -
ISOCRYL WALL
€0.00 -
PU FLEX 1000
€0.00