PGP ART GLAZING
€0.00
2 component polyester putty fortified with glass fibers
MULTIFILLER is a high quality two-component polyester putty fortified with glass fibers, suitable for filling holes and large imperfections and gaps with one coat application. It has exceptional adhesion and easy sanding. It dries fast, without cracking even in thick layers. It is resistant to water, petrol, alkalic solutions and acids.
ADVANTAGES
- Excellent bonding strength
- Perfect finish
- Easy sanding
- Does not shrink
- Excellent resistance to ageing
- Excellent resistance to water
- Excellent resistance to solvents, alkalis, and acids
- Excellent temperature resistance
- Interior and exterior use
APPLICATIONS
- Ideal for repairs on metallic, wooden, plastic, stone, marble surfaces.
- Automobile, boat, wagon and house repairs
† |
† |
† |
† |
|
Coverage: 1 – 2 m2/Kg |
Thinning: no |
Application: by knife |
Touch dry: 5 – 10 minutes 20oC |
† |
† |
† |
† |
|
Hard dry: 20 – 30 minutes 20oC |
Exterior use |
Interior use |
Application temperature: 10oC – 35oC |
† |
† | † | † |
|
Cleaning: with nitro solvent |
† | † | † |
INSTRUCTIONS FOR USE
- Surfaces must be dry and clean from dust, grease and rust.
- Mix putty with 2-3% hardener
- The putty is ready for use. The putty remains workable for 3-6 minutes. Drying time is 5-10 minutes.
- Finished surfaces may be sanded after 20-30 min using sandpaper No 80-120.
- Carefully remove any excess material with a sharp knife before
completely set.
It is advisable to perform a suitability test for each application.
REMARKS
- Do not exceed the mixing ratio of 3% especially at high temperatures since this will accelerate curing.
- Place the caps correctly after use and close tight.
Related products
-
SWAN PRO MAX ACRYLIC
€0.00 -
SWAN ENAMEL AQUA
€0.00 -
SWAN SUPER PRIMER
€0.00