POWERFIX W MONTAGE
€0.00
Protective and decorative transparent acrylic water based varnish for stone surfaces
PORODUR AQUA UVA is high quality transparent, pure acrylic waterbased varnish for stones and artificial building materials, enriched with nano particles and silicone. It has excellent penetrating capacity, excellent resistance to UV rays and adverse weather conditions. It protects surfaces from wearing, tearing, humidity and staining. Preserves and enhances the natural beauty of the surface applied for decorative purposes. It is suitable for interior and exterior use.
ADVANTAGES
- Excellent finishing – enhances the natural beauty of stones
- Excellent penetration
- Excellent water repellence
- Long lasting protection from stains, rain, humidity, fungi, mould etc.
- Resistance to temperature variations
- Excellent UV resistance
- Easy to apply Äì ready to use material
- Interior and exterior use
APPLICATIONS
- Protection and decoration of porous surfaces such as natural or artificial stones, Karystos or Pilio type tiles, marble, bricks, artificial building materials, ceramic tiles (cotto), ceramic roof tiles, cement tiles, cement, decorative gypsum elements, concrete etc.
- Suitable for walls, fireplaces, benches, floors etc.
- Ideal for the protection of substrates decorated with cement screed finish.
- Strengthening of loose or deteriorated substrates.
 |
 |
 |
 |
|
Coverage: 8 – 10 m2/Lt |
Thinning: 5% – 15% with deionized water |
Application: by brush |
Application: by roller |
 |
 |
 |
 |
|
Application: by spray gun |
Touch dry: 30 – 45 minutes 20oC |
Hard dry: 6 hours 20oC |
Exterior use |
 |
 |
 |
|
|
Interior use |
Application temperature: 10oC – 35oC |
Cleaning: with water |
Substrate preparation
- Surfaces must be dry and clean from dust, unstable material, oil and rust.
- New surfaces must be cleaned with wet sponge prior to application.
- Old stained surfaces must be cleaned with OXY CLEAN CL 17 prior to application. Pressure clean wide stone surfaces if needed to remove dirt and use OXY CLEAN CL 17 for stagnant stains.
- Surfaces must be completely dry prior to application.
Application
- Stir material thoroughly before and during application.
- Apply PORODUR AQUA UVA with a brush, roller or spray gun (for vertical surfaces). Special attention must be given for even application.
- When applied on very porous substrates a second coat is recommended. Allow at least 3 -4 hours for drying between the two coats.
- Windows, doors, plants etc must be carefully covered prior to application.
REMARKS
Due to the wide variety of substrates and environmental conditions, a compatibility test is recommended in an inconspicuous spot prior to full scale application.
Related products
-
SEAL & FIX
€0.00 -
MEGACRYL
€0.00 -
NEUTROSEAL
€0.00