Surface Preparation

1. All surfaces should be dry and clean from dirt, grease, loose paint etc.
2. New surfaces should be allowed to dry out completely.
3. Fill minor defects with STANDARD acrylic filler. For large gaps Äì joints use SUPER LITE filler. New surfaces may be smoothed with resin fortified acrylic surface filler ISOMIX WALL STUCCO.
4. New surfaces, porous surfaces as well as surfaces previously painted with low quality paint should be primed with waterbased acrylic primer ISOCRYL DUR AQUA or with solvent based primer ISOCRYL DUR.

Application

Apply SWAN ENERGY EMULSION with a roller or brush. In order to obtain maximum performance of the paint application of two coats is advisable as well as a final coat of high quality emulsion paint to protect the thermal coat.

LEAD STATEMENT

WARNING: Treatment of old surfaces such as dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Lead dust may be released. Lead is toxic. Exposure to lead dust can cause serious illness. Wet sanding/flatting should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.