INSTRUCTIONS FOR USE

• Shake the can well before and during use.
• Ensure the treatment area to be clean, dry and free from oily residues. The liquid cannot penetrate varnished or polished surfaces.
• Avoid using can horizontally. Spray from an angle of 45 degrees.
• Apply the material as close as possible to the infected area.
• Insert the thin tube into the push button and fit the tube into one of the holes. Spray for a few seconds till liquid starts emerging from a nearby hole. Repeat till most holes have been treated either directly or indirectly.
• Wipe off any excess liquid.
• For new untreated timber spray sparingly from a distance 15-25cm without the tube.
• Allow drying prior to varnishing or painting.
• Treatment should be repeated 2-3 times for difficult cases
• Hold the can upside down after use and spray to clean valve

Α well-ventilated area is necessary when the material is applied.
Close lid tightly after use and store in a cool place away from direct sunlight.